Spektrum DX9 Bedienerhandbuch Seite 34

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 48
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 33
34 SPEKTRUM DX9 • TRANSMITTER INSTRUCTION MANUAL
EN
Acro Gyro Function
The Gyro menu option enables you to create up to 7 gyro gain
pointsonamaximumof4curves.Gyrogaincurvesalsoprovide
exibilityinreducinggyrogainasthecontrolstickmovesfarther
away from the center.
To access the Gyro screen
1. In the System Setup List, highlight Aircraft Type.
2. In the Aircraft Type Screen, select NEXT at the bottom right
ofthescreen.ThiswillaccesstheAircraftOptionsscreen.
Activate the desired Gyro function(s). When the gyro function
is active, the Gyro function appears in the Function List.
To program a Gyro curve:
1. Access the Gyro 1, Gyro 2 or Gyro 3 menu option from the
Function list.
2. Assign either Aircraft or Heli to the Gyro Type.
3. Select a trim or a pot to use for a gyro gain trim if desired.
Optionsavailableinclude:R.Knob,LLever,RLever,LTrimA,
and R TrimA.
4. Scroll to Inh > Inh.
a. Select the first Inh and assign the input channel for the
Gyro.Forexample,ifthegyroisinstalledtoassistonthe
ailerons, select Ail.
b. Select the second Inh and assign the output channel for the
Gyro,forexample,theGearchannel.
5.SelecttheCurveyouwishtoedit.
6. Add the desired gyro gain values to the points on the curve.
7. Assign the switch positions to activate the gyro curve. The
curveisactivewhentheboxissolid.
Pitch Curve Function
InAcromodeaPitchCurvescreenisavailablethatallowsa
variable pitch propeller to be used. Up to 4 programmable
curves are available that can be selected via a switch, knob or
stick position. Up to 7 points can be programmed at the desired
position on each curve. Note that the Pitch curve is driven by the
throttle stick position.
To access the Pitch Curve screen:
1. In the System Setup List, highlight Aircraft Type.
2. In the Aircraft Type Screen, select NEXT at the bottom right
ofthescreen.ThiswillaccesstheAircraftOptionsscreen.
ActivatethePitchCurvefunction.WhenthePitchCurve
functionisactivated,thePitchCurvefunctionappearsinthe
Function List.
3.AssignthepitchchannelintheChannelAssignmentfunction
afteractivatingthePitchCurveFunction.
Seitenansicht 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 47 48

Kommentare zu diesen Handbüchern

Keine Kommentare