Spektrum SPM2800US DX10t Bedienungsanleitung Seite 25

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 66
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 24
25SPEKTRUM DX10t • RADIO INSTRUCTION MANUAL
EN
11 PARAMETER PROGRAMMING THE FUNCTIONS OF A SAILPLANE MODEL IN
THE FUNCTION LIST
ServosetupwithSubmenu
Travel
Sub-Trim
Reverse
Speed
AbsoluteTravel
Balance
Pleaserefertowing-typemodelprogrammingfor
instructions.
11-2 Dual Rate and Exponential
SettingscanbedoneforAileron,ElevatorandRudder.
DualRateandExpowillbeshowninpercentages
andswitchesarefreetoassign.Graphicinformation
ofprogrammedvaluesisshownontheleftsideofthe
display.
11-3 Throttle Cut
TheThrottleCutfunctionallowsyoutoshutanengine
offwithallassignedswitchesandtipswitchesonsticks
except:Pot1,Pot2,Pot3andPot4.
IntheThrottlemenu,youcanprogramtheGasPosition,
assignittoaswitchandsetadelayupto5seconds.
Releasetheprogrammedthrottlecutswitchtoresume
normalthrottleoperations.
11-4 Throttle Curve
Pleaserefertowing-typemodelprogrammingfor
instructions.
11-5 Mixes
DependingonthewingtypeyouselectedintheFunction
List,differentmixesareavailable.
AilerontoRudder
AilerontoFlapPosition
ElevatortoFlap
FlaptoElevator
Thisisforwingtype2Aileron,2Flaps
Onsomewingtypessomemixesarenotactiveand
cannotbeselected.Mixingisshowninpercentages.
Thereare6optionalprogrammablemixesthatare
available.
11-6- Camber Presets
ThismenuisactivewhenFlapsareselectedatwingtype.
Adjustthenumericalvaluesforleftandrightaileron
andleftandrightap.Dothesamefortheelevator.
Optionally,adjustthespeedfrom0–30seconds.
11- 7 Camber System
Inthismenu,youadjustthevaluesforSpoilersand
Aileronfrom-100and+100.
Seitenansicht 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 65 66

Kommentare zu diesen Handbüchern

Keine Kommentare