Spektrum SPMAR6260 Betriebsanweisung PDF herunterladen (Seite 17)

17

EN

Problem Possible Cause Solution

The system will

not connect

Your transmitter and

receiver are too close

together. They should be

8 to 12 feet apart

Move transmitter 8 to 12

feet from receiver

You are around metal

objects

Move to an area with less

metal

Model selected is not the

model bound to

Check model selected and

ensure you are bound to

that model

Your transmitter was

accidentally put into bind

mode and is not bound

to your receiver anymore

Rebind your transmitter and

receiver

Receiver quits

responding

during operation

Inadequate battery

voltage

Charge batteries. Spektrum

receivers require at least

3.5V to operate. An

inadequate power supply

can allow voltage to

momentarily drop below

3.5V and cause the receiver

to brownout and reconnect

Loose or damaged wires

or connectors between

battery and receiver

Check the wires and

connection between

battery and receiver. Repair

or replace wires and/or

connectors

Receiver loses

its bind

Transmitter stand or tray

could be depressing the

bind button

If stand is depressing bind

button, remove from stand

and rebind

Bind button pressed

before transmitter

turned on

Rebind your system

following binding

instructions

Receiver blinking

at landing

System turned on and

connected, then receiver

turned off without turning

off transmitter

Turn off transmitter when

receiver is turned off

1 2 ... 12 13 14 15 16 17 18 19 20 21 22

Kommentare zu diesen Handbüchern

Keine Kommentare