3-Channel, 4-Model MemoryDSM® Racing System© 2009 Horizon Hobby, Inc. 4105 Fieldstone Road Champaign, Illinois 61822 USA (877) 504-0233 horizonhobby.c
18192P = The 0 or off function is the default setting and does not assign a function to Grip Button C. If the Auxiliary Channel 3 function is set to “
2021Data ResetThe Data Reset function allows you to reset all the programming in the selected model (1, 2, 3 or 4) to the factory default setti
2223Throttle DeadbandThe throttle deadband feature is used to reduce/eliminate the dead throttle area that exists at neutral to the starting point of
2425Endpoint AdjustmentThe Endpoint Adjustment feature of the DX3.0 allows the maximum travel for the steering, throttle and Auxiliary Channel 3 (opti
2627Lap TimerThe Lap Timer function of the DX3.0 allows the recording of individual lap times based on a 999 second up-timer. Up to 50 laps and times
2829Accessing the Direct Trim ModeThe Direct Trim Mode function of the DX3.0 is accessible through the use of the electronic throttle or steering trim
3031The DX3.0’s electronic Throttle Trim lever, located to the left of the steering wheel, allows the center position of the servo to be manipulated i
3233The Brake Endpoint Adjustment, located at Grip Lever A, allows the maximum servo travel on the braking side of the throttle trigger to be increase
3435Warranty PeriodExclusive Warranty- Horizon Hobby, Inc., (Horizon) warranties that the Products purchased (the “Product”) will be free from defects
3637United States:Electronics and engines requiring inspection or repair should be shipped to the following address:Horizon Service Center4105 Fieldst
23Table of ContentsIntroduction...
3839Declaration of Conformity(in accordance with ISO/IEC 17050-1)No. HH2008111004Product(s): Spektrum DX3.0 Transmitter Item Number(s): SPM20320EEqu
45Servo Reversing1. With the transmitter power switch on, press the SCROLL key to enter the Function mode.2. Press the SCROLL key until REV.NORM appe
67Antenna4. Hold down on the SCROLL and CHANNEL buttons while turning on the transmitter. To enter System Mode, press the SCROLL button until “BND” ap
89•DSM2.4GHzSpreadSpectrumModulation•NowcompatiblewithDSM2andMarinesurfacereceivers,inadditionto DSM surface receivers•Threechanne
1011Control Identification and Location* To remove the Battery Cover, press down on the ridges and push the cover in the direction of the arrow. Remove
1213Located on the left-hand side of the transmitter is the charging jack, which accepts only JR® or Spektrum™ style wall chargers. Please do not atte
1415To enter the System Mode, press both the SCROLL and CHANNEL keys at the same time while turning on the transmitter power switch. By pressing the S
1617Two frame rates are available: F and N. F = Fast (11ms) N = Normal (16.5ms) While most servos are compatible with the fast frame rate, some older
Kommentare zu diesen Handbüchern